Filter
Top Products
WORKING WITH A FILM MAGAZINE
82
Load a film
Because of the symmetrical construction of
the film insert, the empty spool 2 does not
need to be displaced. Press the spring lug 1
outwards and insert the film spool between
the spool bearings in a way that the black
inside of the paper lies outwards.
Make sure that the film runs to the empty
spool as illustrated by the symbol 3. Put the
paper leader straight into the empty spool.
Wind the paper leader up until the arrow
markings on the paper leader are aligned
with the index on the spring lug.
Fig. 16 / 5 Load film
Insert the film insert
Inside of the film magazine, two symbols
and are visible to illustrate the
insertion of the loaded film magazine in the
correct direction.
Insert the loaded film magazine in the way
that the film spool points towards the
symbol and the empty spool points
towards the symbol .
Fig. 16 / 6 Insert film insert
1
2
3