Filter
Top Products
ASSEMBLY INSTRUCTIONS
26
Connect the FireWire cable to the
corresponding socket at the back 1 and to
the IEEE-1394 socket at your computer or at
your PCMCIA-card.
For a more detailed description of the
operation of the Sinar Hy6 s
y
stem in
tethered mode, refer also to the operatin
g
manual of your Sinarback.
Fig. 5 / 25 IEEE-1394 socket at the back
5.6 Attaching a flash device
Fig. 5 / 26 Hot shoe
The Sinar Hy6 system is equipped with a hot
shoe for the connection of TTL-compatible
flash devices and of an SCA-adapter.
The flash device or the SCA-adapter is
connected to the hot shoe 1 at the camera
body, Æ chapter 12 “Use of the Flash”.
Refer also to the user instructions of your
flash device or SCA-adapter.
The inappropriate use of the flash device may cause injuries to the eyes. Please
refer to the operation instructions and to the safety advice in the technical
documentation of the manufacturer of your flash device.
5.7 Replacing the focusing screen
Place the camera in front of you and remove the viewfinder from the camera body. The
focusing screen is now visible.
1
1