Filter
Top Products
ASSEMBLY INSTRUCTIONS
24
1 Sinarback 54 MC
The following parts are necessary for the
assembly of the Sinarback 54 MC:
2 Adapter plate
3 4 screws
4 Screwdriver
Fig. 5 / 17 Sinarback 54MC with adapter kit
Place the adapter plate 2 with the four pins
facing upwards on the camera back 1.
Insert the four screws into the holes in the
adapter plate.
Fix the screws using the screwdriver
4 included in the adapter kit.
Fig. 5 / 18 Sinarback 54MC
Attach the back to the camera. Make sure
that all four of the pins are locked
simultaneously. When the back is detached
from the camera and not in use, please use
the protection cap.
To detach the back from the camera, press
the Adapter Release Button 1 and push it
upwards.
Fig. 5 / 19 Attachment of Sinarback 54MC
1
2
3
4
1