Filter
Top Products
EXPOSURE – EXPOSURE COMPENSATION
60
11.3.5 Exposure Compensation
With Exposure Compensation, you can manually change the exposure values of an
Automatic Exposure Mode.
To open the menu for the setting of the exposure compensation,
press the button “Exposure compensation” B8 in the functional area
“Light metering”.
The exposure compensation is available in all automatic exposure
modes.
Fig. 11 / 10 Exposure compensation
Fig. 11 / 11 Menu “ISO / PGM”
Fig. 11 / 12 Corrected exposure value with light
balance
In the menu “ISO / PGM”, set the exposure
compensation using the Rear Control Wheel
W2. The exposure can be compensated in
steps of ±
3
1
EV in the range from –5.0 to
+5.0 EV.
The changed exposure value is displayed in
EV, and is indicated in the light balance in
the hand grip display and the viewfinder
display.
When the button “Exposure Compensation” is pressed, the viewfinder display changes.
Before the exposure compensation, the
viewfinder display shows an exposure
compensation of 0.
After setting the exposure compensation,
the changed exposure value is indicated in
EV in the light balance in the viewfinder
display as long as the button B8 is pressed.
Releasing the button B8 resets the viewfinder display to the standard settings.
Pressing the Release Button B1 to the first pressure point while pressing the button
Exposure compensation B8 triggers the automatic adaptation of the exposure values.
The compensated exposure value can only be reset using Exposure Compensation B8
again.