Filter
Top Products
EXPOSURE – EXPOSURE MODES
59
With “Toggle”, also the function “Mirror Up” can be used. The mirror is locked, and the
shutter is opened when the Release Button B1 is pressed for the first time, and is closed
when it is pressed for the second time.
Please note that with “Toggle”, the continuous shooting mode is blocked, i.e.
the shutter is only opened and closed once, even if the continuous shooting
mode has been selected.
11.3.4 AE-Lock
The functions of the button “AE-Lock” B7 depends on the selected AE-mode:
When an Automatic Exposure Mode (Shutter Priority, Aperture Priority and Programmed
AutoExposure) is selected, pressing the button AE-Lock B7 saves the current exposure
values. The exposure values are saved as long as the button AE-Lock B7 is pressed, and
are applied when the shutter is released.
When Manual Exposure is selected, pressing the button AE-Lock B7 before the activation
of the shutter triggers the automatic adaptation of the exposure values by the system.
When the Exposure Mode “Bulb” or “Toggle” are selected, the button AE-Lock B7 has no
function.
To save and apply the exposure values, keep
the button AE-Lock B7 pressed when
releasing the shutter.
In the hand grip display, a checkmark 1
appears when AE-Lock B7 is pressed to
indicate that these exposure values are
used.
Fig. 11 / 9 Display “AE-Lock” (Enhanced Mode)
When the function AE-Lock is used, the camera-internal exposure measurement is active,
and the exposure deviation resp. the under- or overexposure of the image is indicated in
the light balance 2 in the viewfinder and the hand grip display.
1
2