Filter
Top Products
ASSEMBLY INSTRUCTIONS
25
5.4 Adjusting the hand grip
The hand grip cannot be detached from the
camera, however it can be adjusted.
To unlock the hand grip, the Hand Grip
Adjustment Button 1 under the hand grip
has to be pressed while turning the hand
grip simultaneously. When the button is
released, the hand grip is fixed and remains
in that position.
Fig. 5 / 21 Adjustment of the hand grip
5.5 Connecting the camera to a computer
The Sinar Hy6 system is remote-controlled from a computer by means of the capturing
software Sinar CaptureShop™ or Sinar eXposure™.
The following Sinar Hy6 camera types can be operated both untethered and tethered:
• Sinar Hy6-e75
• Sinar Hy6-e54
The following type is operated only in tethered mode:
• Sinar Hy6-m54
When attaching a back or a film magazine, make sure that all four of the pins
are locked simultaneously. When not all four of the pins are locked, the
Sinarback or the film magazine has to be removed from the camera body and
re-attached, otherwise the Sinarback or film magazine can fall off. Please make
sure that the back is attached safely to the camera body to prevent any damage
by falling off.
1