Filter
Top Products
16
b Notes
• You may see primary colors shimmering in the
viewfinder when you move your line of sight.
This is not a malfunction. The shimmering
colors will not be recorded on the recording
media.
z Tips
• You can adjust the brightness of the viewfinder
backlight from [VF BACKLIGHT] (p. 83).
• To display images both on the LCD display and
in the viewfinder, set [VF POWERMODE] to
[ON] (p. 84).
• To display images in black and white in the
viewfinder, set [VF COLOR] to [OFF] (p. 84).
When the picture in the viewfinder is
hard to see
If you cannot see the picture in the
viewfinder clearly under bright
circumstances, use the supplied large
eyecup. To attach the large eyecup, stretch
it slightly and align it with the eyecup
groove in the viewfinder. You can attach
the large eyecup facing either the right or
left side.
b Notes
• Do not remove the pre-attached eyecup.
Viewfinder
Viewfinder lens
adjustment lever
Move it until the picture
becomes clear.
Large eyecup
(supplied)
Attach with the
protruding part
at the top.
Step 5: Adjusting the LCD panel and viewfinder (Continued)