Sony 4-157-878-12(1) Camcorder User Manual


 
55
Recording/Playback
b Notes
Select the jack to output signals with [OUTPUT SELECT].
Output resolution depends on the settings of [SDI/HDMI/COMPONENT].
If you set [SDI/HDMI/COMPONENT] to [576p], no signals are output from the SDI OUT jack.
Use an HDMI cable with the HDMI logo.
Images are not output from the HDMI OUT jack of your camcorder, if copyright protection signals are
recorded in the movies.
Images and sounds may not be reproduced correctly on some monitors or TVs.
Do not connect the output jacks of the camcorder with the output jacks of the monitor or TV. A
malfunction may be caused.
This camcorder is not compatible with “BRAVIA” sync.
z Tips
HDMI (High-Definition Multimedia Interface) is an interface to send both video/audio signals. The
HDMI OUT jack outputs high quality images and digital audio.
[OUTPUT SELECT]
setting
SDI OUT HDMI OUT COMPONENT OUT VIDEO OUT
[SDI] aa --
[HDMI] - a -
*1
-
*2
[COMPONENT] - - a -
*3
[VIDEO]---a
*
1
When the HDMI OUT jack is not connected, signals are output from the COMPONENT OUT jack.
*
2
When the HDMI OUT and COMPONENT OUT jacks are not connected, signals are output from the
VIDEO OUT jack.
*
3
When the COMPONENT OUT jack is not connected, signals are output from the VIDEO OUT jack.
HD/SD
[SDI/HDMI/
COMPONENT]
setting
Output resolution
SDI OUT HDMI OUT
COMPONENT
OUT
VIDEO OUT
HD
720p/576i 720p 720p 720p 576i
1080i/576i 1080i 1080i 1080i 576i
576p No output 576p 576p 576i
576i 576i 576i 576i 576i
SD
720p/576i 576i 576i 576i 576i
1080i/576i 576i 576i 576i 576i
576p No output 576p 576p 576i
576i 576i 576i 576i 576i
Continued ,