Filter
Top Products
4-60 Chapter 4 Adjustments and Settings for Recording
4
MARKER 1 / 2 page (factory settings)
3 Push the MENU CANCEL / PRST / ITEM switch repeatedly to
ITEM until the cursor reaches the desired item (or use the ITEM +
UP / DOWN function).
4 Press the UP or DOWN button to specify the setting for the selected
item as follows:
CENTER or SAFETY ZONE selection : To turn the display on,
press the UP button ; to turn it off, press the DOWN button.
SAFETY AREA selection : To set the safety zone to 90 % of the
screen area, press the UP button; to set it to 80 % of the screen
area, press the DOWN button.
CENTER H selection : To move the center marker on the
viewfinder screen to the right, press the UP button; to move it to
the left, press the DOWN button.
CENTER V selection : To move the center marker on the
viewfinder screen up, press the UP button; to move it down, press
the DOWN button.
If any of the above selections is set to ON, the corresponding marker
is displayed.
ON / OFF of safety zone marker
indicator
Safety zone area setting
ON / OFF of center marker indicator
Setting of display position of center
marker (vertical)
Setting of display position of center
marker (horizontal)