Filter
Top Products
Chapter 4 Adjustments and Settings for Recording 4-85
4
If data cannot be written
Data cannot be written if one of the following error messages appears
when the UP button is pressed in step 6 (page 4-82).
Data write error messages
Error message
CARD NOT
INSERTED!
WRITE
PROTECTED!
WRITE ERROR!
(flashing)
Reason
No setup card is
inserted.
WRITE PROTECT
is set to ON.
Circuit or card fault
Action
Close the menu and insert or
reinsert the card.
Set WRITE PROTECT to OFF.
Check the circuitry, or replace the
card with a verified card.
Reading saved data from a card
Follow the procedure below.
Reading saved data from a card
1 Set the MENU ON / OFF / PAGE switch to ON.
The page that was on the screen when the last menu operation ended
appears on the viewfinder screen. (When this menu is first used, the
lowest-numbered page of the currently selected pages for
configuring the menu appears.)
(Continued)