Filter
Top Products
4-6 Chapter 4 Adjustments and Settings for Recording
4
If a memory error occurs
If the error message “: MEMORY : NG” flashes on the viewfinder
screen for about 3 seconds when the camcorder is turned on, the black
balance memory content has been lost.
Adjust the black balance again. Contact your Sony representative if this
message continues to appear even after the black balance has been
adjusted again.
For more information, refer to the Maintenance Manual.
4-1-2 Adjusting the White Balance
Follow the procedure below to automatically adjust the white balance.
1 Set the switches as follows:
If the setting of the GAIN selector or WHITE BAL switch is
changed, a message reporting the set position appears for about 3
seconds in the setting change and adjustment progress message
display area of the viewfinder screen (in display mode 3).
GAIN : Set as low as possible.
WHITE BAL : A or B
MENU ON / OFF / PAGE : OFF
OUTPUT / DCC : CAM