Filter
Top Products
Chapter 6 Maintenance 6-3
6
Testing the viewfinder
1 Adjust the position of the viewfinder.
2 Check that the color bars are displayed in the viewfinder, and adjust
the BRIGHT, CONTRAST, and PEAKING controls to give the best
color bar display. Also check that the message “BARS” flashes on
the center of the viewfinder screen.
3 (1) Set the MENU ON / OFF / PAGE switch to ON and check that
the setup menu is displayed on the viewfinder screen.
(2) Push the MENU ON / OFF / PAGE switch to PAGE and check
that the setup menu page changes to the next page.
(3) Push the MENU CANCEL / PRST / ITEM switch to ITEM and
check that the cursor moves within the current page.
(4) Press the UP or DOWN button and check that the setting of the
item selected by the cursor changes or toggles between ON and
OFF.
4 Set the OUTPUT / DCC selector to CAM, and change the FILTER
selector position in the sequence of 1, 2 , 3, 4. Check that the
FILTER indicator on the viewfinder screen displays the correct
numbers.
(Continued)