Filter
Top Products
3-6 Chapter 3 Recording and Playback
3
4 After checking the points below load the cassette, and close the
cassette lid.
• The cassette is not set to write-protected.
• There is no slack in the tape.
Basic procedure for shooting : from adjusting the
black balance and white balance to stopping recording
After turning on the power and loading a cassette, set the switches and
selectors as shown below and begin operation.
Switch and selector settings before shooting
GAIN : Set as
low as possible.
F-RUN / R-RUN :
F-RUN or R-RUN
(set as needed)
OUTPUT / DCC :
CAM, DCC ON
Iris : Automatic
Zoom :
Automatic
AUDIO SELECT
CH-1 / CH-2 : AUTO
AUDIO IND : ON