Filter
Top Products
4-30 Chapter 4 Adjustments and Settings for Recording
4
2 Set the real time, using the SHIFT and ADVANCE buttons.
3 Set the REAL TIME switch to ON.
The real time will be recorded in the VITC and the user bits in the
LTC.
By changing an internal setting, you can specify that the real time is
recorded in the LTC and the user bits in the VITC.
For more information, refer to the Maintenance Manual.
Displaying the real time held in the VITC
Set the DISPLAY switch to U-BIT and hold down the HOLD button.
The real time held in the VITC will be displayed while the HOLD button
is being pressed.