Filter
Top Products
4-88 Chapter 4 Adjustments and Settings for Recording
4
If data cannot be read
Data cannot be read if one of the following error messages appears when
the UP button is pressed in step 6 (page 4-87).
Data read error messages
Error message
CARD NOT
INSERTED!
READ ERROR!
(flashing)
CARD DATA NG!
(flashing)
Reason
No setup card is inserted.
Circuit or card fault
The card contains the
data that cannot be read
into this camcorder.
Action
Close the menu and insert
or reinsert the card.
Re-check, and consult a
Sony representative.
Do not try to read the data
written for another
camcorder.
Setting the card ID
When data is written to a setup card, it is useful to set an ID for the card
to identify it.
When data is saved to a card, a card ID is written to the card together
with the data. When data is read from a card, the card ID is also read,
and that ID overwrites the card ID associated with the data that was
previously in the camcorder.
1 Move the cursor to ID EDIT on the SETUP CARD page.
The message “OK? (Y : UP)” appears at the bottom of the screen.
2 Press the UP button.
The currently set card ID appears. If no card ID is currently set, 10
spaces (π) appear. The cursor is at the left-most character or space.