Filter
Top Products
Chapter 4 Adjustments and Settings for Recording 4-29
4
4 Press the RET button on the lens.
This reads the previous recording, and synchronizes the internal time
code generator, thus allowing the new time code recorded to follow
on consecutively.
4-5-3 Saving the Real Time in the VITC
Follow the procedure below to save the real time in the VITC.
Saving the real time in the VITC
1 Set the REAL TIME switch to SET.
(Continued)
HOLD button DISPLAY switch
Illustration : DVW-700 / 700WS (for the NTSC broodcast system)