Filter
Top Products
Chapter 2 Locations and Functions of Parts and Controls 2-17
2
5 ZEBRA (zebra pattern) switch
This switch controls the zebra pattern on the viewfinder screen.
ON : The zebra pattern is displayed and stays.
OFF : No zebra pattern is displayed.
MOMENT : The zebra pattern is displayed and stays for a few seconds.
The zebra pattern display is factory set to indicate picture areas where
the video level is approximately 70 % IRE (for the DVW-700 /
700WS) or 490 mV (for the DVW-700P / 700WSP).
Note that a setup menu can be used to set it to simultaneously indicate
areas of 100 % IRE (for the DVW-700 / 700WS) and above, or 700
mV (for the DVW-700P / 700WSP) and above.
For more information, refer to the Maintenance Manual.
6 Diopter adjustment ring
Use this ring to adjust the viewfinder image for your vision.
7 Viewfinder left-right positioning ring
Use this ring to move the viewfinder sideways.
8 Viewfinder front-rear positioning lever
Use this lever to move the viewfinder forward or backward.
9 Cameraman tally indicator
This indicator lights while the camcorder is operating.
Slide the window open when you shoot, keeping your eye away from the
viewfinder.
0 Viewfinder stopper
Pull this stopper up to detach the viewfinder from the camera.