Filter
Top Products
3
Chapter 3 Recording and Playback 3-43
• Cassette control buttons
While recording in manual Interval Rec mode (the green tally flashes (2
flashes/second)), you cannot use cassette control buttons (REW, F
FWD, PLAY and STOP). Note that the camcorder stops the manual
interval recording if you press the EJECT button while manual interval
recording. However, the tape may run to record the picture data stored
in the memory before stopping the manual interval recording.
• Menu operation
You cannot change the settings of LOOP/INTVAL REC and NUMBER
OF FRAME on the FUNCTION 1 page after the camcorder starts
manual interval recording. To change the settings, stops auto interval
recording by setting the POWER switch to OFF or pressing the EJECT
button.
• When the camcorder power is switched off during manual interval
recording
• When the POWER switch switched OFF, the camcorder will switch
off by itself after the tape has run for a few seconds to record the
picture data stored in the memory.
• If you remove the battery, unplug the DC cable, or cut the power to the
AC adaptor while manual interval recording, the image currently being
shot on the camcorder (maximum 5 seconds, 150 frames) will not be
recorded. Do not change the battery while manual interval recording.
• When tape runs out during manual interval recording
Note that the picture data (maximum 5 seconds, 150 frames) at the
instant the tape stopped is not recorded if the tape runs out and the
camcorder stops.