Filter
Top Products
4
Chapter 4 Adjustments and Settings for Recording4-66
5 Remaining battery/battery voltage indicator
This shows the battery voltage of the DC IN connector.
When an Anton Bauer Intelligent Battery System is used, the indication
is automatically switched and shows the remaining battery capacity of
the Anton Bauer battery numerically.
6 Subject illumination indicator
This appears, depending on the setting, to indicate the subject
illumination is inadequate.
7 Iris setting/auto iris override
This indicator indicates the f-stop (iris setting) of the lens.
Also, the auto iris override is displayed using two x which appear in the
upper and lower parts to the left of the F number respectively.
8 Remaining tape
This indicator indicates the remaining tape recording time (in minutes) of
the VTR.
Example of remaining tape indicator
Display Tape time remaining
F - 30 Full to 30 minutes
30 - 25 30 to 25 minutes
25 - 20 25 to 20 minutes
20 - 15 20 to 15 minutes
15 - 10 15 to 10 minutes
10 - 5 10 to 5 minutes
5 - 0 5 to 2 minutes
5 - 0 (flashing) Less than 2 minutes