Filter
Top Products
4
Chapter 4 Adjustments and Settings for Recording4-110
Functions to be assigned to the ASSIGN 1 (push-type) switch
Function Content
OFF Disables the switch.
F.MIC MONO STEREO Assigns the monaural/stereo switch
function when the stereo microphone is
connected to the MIC IN connector.
LOOP REC ON/OFF Assigns the Loop Rec mode ON or OFF
function.
a)
TEST OUT CHARACTER Assigns the function to switch whether or
not the characters are mixed to the video
signal to be output from the TEST OUT
connector.
MARKER Assigns the ON/OFF function to display all
markers.
b)
EZ FOCUS Assigns the ON/OFF function of the EZ
FOCUS
c)
function.
RE-TAKE Assigns the RE-TAKE function to the
switch.
ATW Assigns the ON/OFF function of auto-
tracing white balance.
RETURN VIDEO Assigns the ON/OFF function to display the
image of the return video signal on the
viewfinder to the switch.
d)
LENS RET Assigns the same function as that of the
RET switch on the lens to the switch.
REC BUTTON Assigns the VTR S/S (start/stop) function
to the switch.
TURBO BUTTON Assigns the turbo gain function to the
switch.
a) When the HKDW-703 is not installed, even though you can
assign this function to the ASSIGN 1 switch on the ASS <1>
SEL window, the ASSIGN 1 switch does not work.