Filter
Top Products
Chapter 5 Setting Up the Camcorder
5
5-24
AUDIO IN for CH-1
or CH-2
WRR-860A
Set the LINE/MIC/
+48 V ON switch
for the channel to
which the audio
out cable is
attached to MIC.
DC OUT
2 Mount the tuner on the WRR tuner fitting.
3 Connect the tuner power cord to the DC OUT connector of the
camcorder, and the audio output cable to the AUDIO IN CH-1 or
CH-2 connector.
AUDIO IN switch: When the XLR
connection automatic detection function
is set to OFF on the VTR MODE 1 page of
the MAINTENANCE menu, set the AUDIO
IN switch for the channel to which the
audio output cable is connected to REAR.