Filter
Top Products
4
Chapter 4 Adjustments and Settings for Recording4-64
4-7 Status Display on the
Viewfinder Screen
The viewfinder screen displays not only the video picture but also
characters and messages indicating the camcorder settings and operating
status, a center marker, a safety zone marker, etc.
When the MENU ON/OFF switch is set to OFF and the DISPLAY
switch is set to ON, the items for which an “ON” setting was made in the
VF DISP1 page of the USER menu or with related switches are
displayed at the top and bottom of the screen. The messages that give
details of the settings and adjustment progress and results can also be
made to appear for about 3 seconds while settings are being changed,
during adjustment, and after adjustment.
For information about the display item selection, see “4-7-2 Selecting the Display
Items” on page 4-69. For information about setting change and adjustment
progress messages, see “4-7-3 Display Mode and Setting Change and Adjustment
Progress Messages” on page 4-72.
For information about marker display, see “4-7-4 Setting the Marker Display” on
page 4-74.