Filter
Top Products
3
Chapter 3 Recording and Playback3-32
13 Push the MENU knob.
The t mark at the left of REC TIME changes to the z mark and
the z mark at the left of the setting changes to the question mark.
14 Turn the MENU knob clockwise or counterclockwise until the
desired time to be recorded on the tape appears.
If you turn the MENU knob clockwise or counterclockwise, the
Loop Rec time changes in order of 5 SEC y 10SEC y 15SEC
y 20SEC y 30SEC y 40SEC y 50SEC y 1MIN y
2MIN y .......38MN y 39MIN y 40MIN.
where SEC means seconds (5SEC is 5 seconds) and MIN means
minutes (1MIN is one minute).
You cannot set a REC TIME that is less than one thirtieth as long as
TAKE TOTAL TIME.
For example: When TAKE TOTAL TIME is set to 1H, the smallest
value of REC TIME is 2 MIN. (60 minutes divided by 30 gives 2
minutes.)
The time setting to be displayed when turning the MENU knob
changes within the available setting times.
Be sure to set REC TIME after setting TAKE TOTAL TIME.