Filter
Top Products
HELP
SAL35F14G (1.4/35G) (35mm F1.4G)
HELP04
Adhesive bond (B-40): J-6082-614-A
Apply the adhesive bond (B-40) to 5 screws shown in figure and tighten the screws.
HELP05
Adhesive bond (LOCTITE 460) (Note)
Note: Use adhesive bond (LOCTITE 460) or an equivalent article.
Do not use what becomes white after drying like quick-drying glue.
Anti-diffusion agent (A-20): J-6082-611-A
Grease (G-85): J-6082-626-A
1. Apply the anti-diffusion agent (A-20) to the indicated portions of lens mount.
2. Apply the grease (G-85) to 3 locations of indicated portion3 (3 locations) of lens mount.
3. Apply the adhesive bond (LOCTITE 460) to the stopper screw and attach it to the lens mount.
Apply the adhesive bond (B-40)
Apply the adhesive bond (B-40)
Apply the adhesive bond (B-40)
Light Interception Tube
Lens Mount
Apply the grease (G-85) to 3 locations of
indicated portion.
Apply the anti-diffusion agent (A-20)
to all circumferences of indicated Portion.
Apply the adhesive bond (LOCTITE 460)
Apply the grease (G-85) (rear side)