Filter
Top Products
4-19
SAL35F14G (1.4/35G) (35mm F1.4G)
2) Attach the checking lens to the lens test projector, and set the equipments as shown in Fig.4-3-2.
3) Turn the fan switch of the lens test projector to ON, then turn the lamp switch to ON.
Fig.4-3-2
4) Turn the focus ring of the checking lens until the chart image projected on the screen is the sharpest at the center (y’=0).
5) Set the plane mirror to the center of the projected image (y’= 0), and adjust the projector position so that the mirror reflects the light
to the center of the lens.
Distance
Lens test projector
Chart
Fan switch
Lamp switch
Plane mirror
Screen
A-mount attachment
Checking lens
F L