Filter
Top Products
HELP
SAL35F14G (1.4/35G) (35mm F1.4G)
HELP13
Adhesive bond (B-40): J-6082-614-A
1. Rotarting the cam tube, affix indicated hole of the cam tube and U groove of the fixed tube.
2. Align the notch of the fixed tube and pin of the iris control plate block, attach the inner tube.
3. Select the guide rollers fitting to the grooves of cam tube set, apply the adhesive bond (B-40) to the tips of screwed portions of guide
pins, and tighten the guide pins.
Note: Confirm that the cam tube rotates smoothly.
Hole
Guide Roller
Pin of iris control plate block
Inner Tube
Notch
Notch
Cam Tube
Fixed Tube
U Groove
Guide Roller
Guide Roller
Guide Roller
Guide Roller
Guide Roller
Guide Pin
Guide Pin
Guide Pin
Guide Pin
Guide Pin
Guide Pin
Apply the adhesive
bond (B-40)
Apply the adhesive
bond (B-40)
Apply the adhesive
bond (B-40)
Apply the adhesive
bond (B-40)
Apply the adhesive
bond (B-40)
Apply the adhesive
bond (B-40)
2 Group Lens Block