Filter
Top Products
4-8
SAL35F14G (1.4/35G) (35mm F1.4G)
3. Confirmation of PC card setting
1) Select “All programs” - “MeasumentComputing” - “InstaCal” from the startup menu, and start up the software.
Note: Depending on the Windows setting, the window below may differ.
Fig.4-1-16
2) When “PC-CARD-DIO48” is detected, the window below appears. Confirm that the PC-CARD-DIO48” is checked.
Note: Depending on the slot inserted, the slot No. differs.
Fig.4-1-17
3) Confirm that “PC-CARD-DIO48” is recognized as “Board#0”.
Note: If not recognized as “Board#0”, the program does not work properly.
Fig.4-1-18
4) Click “File” - “Exit” to terminate “InstaCal”.