Filter
Top Products
4-35
SAL35F14G (1.4/35G) (35mm F1.4G)
3. In case of error display in the Focus Hold Button
1) When the Focus Hold Button cannot be pressed within a certain period of time or the button is defective, the window below appears.
Fig.4-8-5
2) In case of error caused by time-out of key pressing, perform the work with caution so as to press the focus hold button within a
certain period of time.
3) Although the button is pressed within a certain period of time, if the error occurs, replace parts relating to the focus hold button.
(Refer to “2-1-5. G ORNAMENTAL RING BLOCK AND FOCUS HOLD BUTTON BASE”)
4) Perform “2. Checking Method”again, repeat the inspection until “OK” appears on the pop-up window.