Filter
Top Products
HELP
SAL35F14G (1.4/35G) (35mm F1.4G)
HELP15
Adhesive bond (B-10): J-6082-612-A
Grease (G-35): J-6082-621-A
Anti-diffusion agent (A-20): J-6082-611-A
1. Apply the anti-diffusion agent (A-20) to the indicated portions of cam tube.
2. Apply the grease (G-35) to the cam tube, cam groove and them contact zone.
3. Attach the float ring so that the groove of cam tube places the bosses of float ring.
4. Apply the grease (G-35) to the indicated portions of cam tube retainer.
5. After tightening the cam tube retainer, loosen it about 10 to 15mm from dead end, apply the adhesive bond (B-10) to indicated
portion.
6. Comform the movement of the cam tube.
Cam Tube
Apply the grease
(G-35)
After confirming the movement,
apply the adhesive bond (B-10) in
width of 5 to 10mm to 2 locations.
Apply the grease (G-35)
(6 locations of cam groove)
Apply the anti-diffusion agent (A-20)
Apply the anti-diffusion agent (A-20)
Cam Tube Retainer
Apply the grease (G-35) to holding
surface sides of cam tube retainer.
Apply the anti-diffusion agent (A-20)
Cam Tube
Cam Tube
Apply the grease (G-35)
Cam Tube Retainer
Apply the adhesive bond (B-10)
(circumference of 2 locations,
width of 5 to 10mm)
Fixed Tube
Apply the grease (G-35)
(6 locations of cam groove)
Apply the grease (G-35)
Fixed Tube
Groove
Boss of float ring
Distance Control Tube