4-10
SAL35F14G (1.4/35G) (35mm F1.4G)
Finished Inspection JIG
Lens
4-1-3. Connection of Finished Inspection JIG and Lens Adjustment Program
(ActuatorChecker.exe)
Note: Confirm “4-1-2. Lens Adjustment Program (ActuatorChecker)” has been completed before this procedure is executed.
Equipment
• Personal Computer
• USB cord with connector
• Finished Inspection JIG
• Lens Adjustment Program (ActuatorChecker.exe)
1. Connect equipment and checking lens as shown Fig.4-1-20.
Fig.4-1-20
2. Turn on the finished inspection JIG.
3. Turn on the personal computer.
4. Start up “ActuatorChecker.exe” from an arbitrary folder, conform that start up program normally.
Note: Turn off the finished inspection jig after use.