Filter
Top Products
HELP
SAL35F14G (1.4/35G) (35mm F1.4G)
HELP17
Apply the adhesive bond (B-40)
Apply the adhesive bond (B-40)
Apply the adhesive
bond (B-40)
Torque Ring A
Torque Ring A
Charging Wick Pin
Apply the anti-diffusion agent (A-20)
Apply the anti-diffusion
agent (A-20)
Apply the anti-diffusion agent (A-20)
Torque Ring A
Torque Ring B
Apply the grease (G-115)
Scissors
lever block
Scissors
lever block
Scissors lever block
Float RIng
Float RIng
Adhesive bond (B-40): J-6082-614-A
Grease (G-115): J-6082-627-A
Anti-diffusion agent (A-20): J-6082-611-A
1. Apply the anti-diffusion agent (A-20) to the indicated portions of the torque ring A.
2. Apply the grease (G-115) to contact zone of the torque ring A, the float ring and the scissors lever block.
3. Attach the float ring and the scissors lever block to the torque ring A, tighten the screw temporarily.
Note: When turning the float ring, to become shake is minimized and to become turn the float ring smoothly, do the adjustment of
the changing wick pin of scissors lever block.
4. Attach the float ring B to float ring A shown in the figure, apply the adhesive bond (B-40) to the screws and tighten them.