Filter
Top Products
HELP
SAL35F14G (1.4/35G) (35mm F1.4G)
HELP16
Adhesive bond (B-40): J-6082-614-A
Grease (G-35): J-6082-621-A
Grease (G-80): J-6082-625-A
Anti-diffusion agent (A-20): J-6082-611-A
1. Apply the anti-diffusion agent (A-20) and the grease (G-35) to the indicated portion of the fixed tube.
2. Apply the grease (G-80) to contact zone of the torque ring B, the fixed tube and the friction (SP).
3. Apply the grease (G-80) to contact zone of the torque ring punching stopper and the float ring and the fixed tube.
4. Attach the torque ring punching stopper to the fixed tube with indicated.
5. Attach the friction (SP) and torque ring A shown in the figure, apply the adhesive bond (B-40) to the screws and tighten them.
6. Apply the grease (G-80) to contact zone of the distance control tube and the control tube guide pin.
7. Loosen the stopper screw of the scissors lever block, align the distance control tube to the scissors lever and attach them. Apply the
adhesive bond (B-40) to the control tube guide pin and tighten them.
8. Tighten the stopper screw of the scissors lever block.
Torque Ring
Punching Stopper
Groove
Apply the adhesive
bond (B-40)
Apply the adhesive bond (B-40)
Apply the adhesive
bond (B-40)
Apply the adhesive bond (B-40)
Torque Ring A
Friction (SP)
Fixed Tube
Torque Ring
Punching Stopper
Torque Ring
Punching Stopper
Torque Ring
Punching Stopper
long
short
short
long
long
short
Control Tube Guide Pin
Apply the adhesive
bond (B-40)
Apply the adhesive
bond (B-40)
Distance Control Tube
Control Tube
Guide Pin
Apply the anti-diffusion agent (A-20)
Torque Ring B Torque Ring A
Friction (SP)
Fixed Tube
Apply the grease (G-80)
Apply the grease
(G-35)
Apply the grease
(G-35)
Apply the grease
(G-80)
Fixed Tube
Apply the grease (G-80)
Distance Control Tube
Control Tube
Guide Pin
Control Tube Guide Pin
Fixed Tube
Scissors lever block