Filter
Top Products
4-34
SAL35F14G (1.4/35G) (35mm F1.4G)
4-8. FOCUS HOLD BUTTON CHECK (FOCUS HOLD BUTTON)
Equipment
• Personal Computer
• Finished Inspection JIG
• Lens Adjustment Program (ActuatorChecker.exe)
1. Preparations
1) Connected to equipment with checking lens. (Refer to Section 4-1-3.)
2) Start up of “ActuatorChecker.exe”.
3) Click [Set up], and perform the initial setting. (Refer to Section 4-1-4.)
2. Checking Method
1) Click the [Focus Hold Button].
Fig.4-8-1
2) The Serial window appears. Input the lens serial number.
Note: When [OK] is clicked without inputting the serial number, the date executed is displayed on the completion window of each
item.
Fig.4-8-2
3) The message “Push [FOCUS HOLD] button once softly.” is displayed on the pop-up window.
Press the focus hold button.
Fig.4-8-3
4) When the focus hold button check finishes normally, “OK” is displayed on the pop-up window.
Fig.4-8-4