Filter
Top Products
4-28
SAL35F14G (1.4/35G) (35mm F1.4G)
5) The message “If Focus-Adjustment-Point is found, Buzzer sounds”. is displayed on the pop-up window.
Search the position where the sound beeps by turning the lens to the infinity position.
Fig.4-7-3
6) At the position where the sound beeps, tighten two screws loosened, apply the adhesive bond (B-10) to the screws.
7) Perform “4-7-2. Focus Brush Position Check” and “4-7-3. Focus Brush Pattern Check”
3. In case of error display in the Search Focus Adjustment Point
1) When the error display and the NG display appear to the pop-up window, press the ENTER key to return to the initial window, and
perform “2. Checking Method”again.
Fig.4-7-4
Fig.4-7-5
2) If the “NG” appears again, thought cause communication error of the finished inspection JIG and checking lens, confirm or perform
the following.
• Improper connection of connector.
• Improper of BL contact.
• Disconnection of mirror box fixture.