Filter
Top Products
HELP
SAL35F14G (1.4/35G) (35mm F1.4G)
HELP11
Adhesive bond (B-60): J-6082-616-A
Please follow the following points at the time of obtaining a main flexible block.
Main Flexible Block
Flexible
Base Plate
Flexible
Base Plate
Flexible Block
Flexible Tape B
Flexible Set Tape D
Flexible base plate
Part A is bent in the direction of the arrow, and it puts it.
A
Main Flexible Block is turned in part A, put,
and the adhesive bond (B-60) is spread on
the instruction part in figure.
A
Flexible tape B is put on the flexible base plate and
after putting, Main flexible block is put along the
putting standard.
Sticking standard