Filter
Top Products
HELP
SAL35F14G (1.4/35G) (35mm F1.4G)
HELP12
Adhesive bond (B-40): J-6082-614-A
Grease (G-85): J-6082-626-A
1. Apply the adhesive bond (B-40) to the tips of screwed portions of 2 stopper pins and tighten 2 stopper pins.
2. Apply the adhesive bond (B-40) to the tips of 4 screws shown in figure and tighten 4 screws.
3. Apply the grease (G-85) to all circumferences of gear of joint tube.
Apply the adhesive bond (B-40)
Stopper pin
Stopper pin
Apply the adhesive bond (B-40)
Apply the adhesive bond (B-40)
Apply the grease (G-85)
to the circumference of gear.