Filter
Top Products
13
Feature Highlights
PC Control and Cloning
PC Control – You can transfer programming data to and
from your scanner and your personal computer, and
control the scanner using a computer. This helps you find
frequencies listed on the Internet and load them into the
scanner.
Clone Mode – You can clone all programmed data,
including the contents of the scanner’s memory, menu
settings, and other parameters from one USC230
scanner to another USC230 scanner.
About This Manual
The screen displays used in this manual are
representations of what might appear when you use your
scanner. Since what you see depends on the frequencies
for your area and the settings you select, you might notice
some differences between what is in this manual and
what appears on your scanner.
How the Scanner’s Controls Are
Represented in This Manual
To help navigate the scanner’s menus, the steps shown in
this manual show the displays you see and the keys you
press or control you operate to get a desired result.
This example shows you how to use the scanner’s menu to
edit an existing system name. It shows you the key to
press ( ) to select a menu option and the option you
see (Program System) when you press . It also
instructs you to turn the scroll control (shown as
) to view
a series of choices then select one choice (Edit Name).
Program System E
Select the system E
Edit Name E
Menu
Menu
Menu
SC230 Paper OM 062206.fm Page 13 Friday, July 21, 2006 7:39 PM