Filter
Top Products
70
Searching and Storing
Editing a Custom Search Range
You can edit up to 10 custom search ranges. The names
of the custom search ranges appear on the display. The
default custom search range names appear as CUSTOM
1, CUSTOM 2, and so on.
1. Press then turn the scroll control until
Search For ... appears. Then press E. Or press
and Srch, then No. One of the search feature
options appear.
2. Turn the scroll control until EDIT CUSTOM appears,
then press E to select it.
3. Turn the scroll control until the name of the custom
search range you want to edit appears, then press E
to select it. The following options appear as you turn
the scroll control.
EDIT NAME - lets you edit the custom search range’s
name
EDIT SRCH LIMIT - lets you view and select the
frequency ranges to search. The scanner prompts
you to enter the upper and lower search limits.
SET DELAY TIME - lets you set the amount of time
the scanner will delay before continuing to search
after a transmission ends
SET MODULATION - lets you set the custom search
range’s modulation type
SET ATTENUATOR - lets you set whether the scanner
will attenuate reception by 18dB during search
SET DATA SKIP - lets you set whether the scanner
will skip data transmissions during search
SET STEP - lets you set the custom search range’s
step (the gap between frequencies)
4. Select the option you want to change for the custom
search range you selected, then press E.
Auto Search and Store
Your scanner’s Auto Store feature lets you search for new
frequencies in custom search ranges or within a service
search range.
Menu
Func
SC230 Paper OM 062206.fm Page 70 Friday, July 21, 2006 7:39 PM