Filter
Top Products
82
Troubleshooting
Scan won’t
start.
The channel might
not be active.
Wait for a transmission
on the channel.
You must press
Scan to scan.
Press Scan.
The squelch
might need to be
adjusted.
Adjust the squelch
threshold. See “Turning
On the Scanner and
Setting the Squelch” on
Page 33.
One or more
channels might be
locked out.
Make sure the channels
you want to scan are
not locked out.
The antenna
might need to be
adjusted.
Check the antenna
connection.
SC230 Paper OM 062206.fm Page 82 Friday, July 21, 2006 7:39 PM