Filter
Top Products
31
Setting Up Your Scanner
A Look At The Display
The display has indicators that show the scanner's
current operating status. The display information helps
you understand how your scanner operates. The dark
area shown above the icons in this illustration is the text
display area. Information about the currently tuned
frequency appears here.
SYS - shows the currently activated system, appears with
numbers (1-9). The currently active system indicator
flashes.
ATT - appears when the attenuator feature is turned on.
PRI - appears when the priority feature is turned on (see
“Priority Scan” on Page 39).
- appears when you lock the keypad (see
“Locking/Unlocking the Keypad” on Page 39).
- alerts you when the battery power gets low.
GRP - shows the currently activated group, appears with
numbers ( - ). The currently active group indicator
flashes.
AM/FM/NFM - appears to show the type of transmission.
L/O - appears when you manually select a channel you
locked out or a skip frequency.
- appears when you hold down to select a
function.
- appears when the scanner is set to a Close Call
feature mode (see “Using the Close Call Feature” on
Page 72).
0 9
F
Func
SC230 Paper OM 062206.fm Page 31 Friday, July 21, 2006 7:39 PM