Filter
Top Products
76
Search and Close Call Options
Search and Close Call Options
The settings in this section affect custom searches,
service searches, and Close Call operation.
Managing Locked-Out Frequencies
While searching or during Close Call operation, if you
press L/O while the scanner is stopped on a frequency,
that frequency is locked out of these modes. You can lock
out up to 200 frequencies.
Note: Locking out a frequency does not lock out a
channel that contains that frequency.
Unlocking All Frequencies
Srch/CloCall Opt E
Freq Lockouts E Unlock All E
The scanner prompts you to confirm deletion. To confirm
and delete all locked-out frequencies, press E. Otherwise,
to cancel, press No.
Reviewing Locked Out Frequencies
Srch/CloCall Opt E
Freq Lockouts E Rvw Search L/O E
The scanner displays the first locked-out frequency and
prompts you to unlock the frequency. Press E to unlock
the frequency. Or, rotate the scroll control or press No to
select a different frequency. To exit the review, press
.
Searching for Subaudible Tones
Srch/CloCall Opt E
CTCSS/DCS Search E
This setting controls whether the scanner will search for a
subaudible tone when it stops on a transmission during
search or Close Call operation.
Off The scanner does not search for subaudible tones.
On The scanner searches for and displays any
subaudible tone found.
Menu
Menu
Menu
Menu
Search and Close Call Options
SC230 Paper OM 062206.fm Page 76 Friday, July 21, 2006 7:39 PM