Filter
Top Products
75
Using the Close Call Feature
Close Call Hits
When the scanner detects a Close Call hit, it alerts you
according to the Override and Alert settings in the previous
section. While listening to a Close Call hit, you can press
Hold to hold on the hit frequency, press E to quickly save
the frequency into memory, press L/O to lock out the
frequency from Close Call and Search operation, or wait
for the transmission to end. If you are in Close Call Only
or Close Call Override mode, and you do not press any
key, the scanner returns to its previous operation after the
transmission ends and the set delay time expires.
If you are holding on the frequency, press Hold again to
resume the previous operation.
SC230 Paper OM 062206.fm Page 75 Friday, July 21, 2006 7:39 PM