Filter
Top Products
81
Troubleshooting
Troubleshooting
If your USC230 is not performing properly, try these steps.
Problem Possible Cause Suggestion
The
scanner
doesn’t
work.
The scanner
might not be
receiving any
power.
Make sure the AC
adapter is connected to
an AC outlet and the
scanner.
If there is a wall switch
that controls power to
the AC outlet where you
connected the AC
adapter, make sure it is
on.
Improper
reception.
The antenna
might need to be
adjusted.
Check the antenna
connection or move or
reposition the antenna.
Move the scanner.
You might be in a
remote area that could
require an optional
multi-band antenna.
Check with your dealer
or local electronics
store.
Scan won’t
stop.
The squelch
might need to be
adjusted.
Adjust the squelch
threshold. See “Turning
On the Scanner and
Setting the Squelch” on
Page 33.
The antenna
might need to be
adjusted.
Check the antenna
connection.
One or more
channels might be
locked out.
Make sure the channels
you want to scan are
not locked out.
The channel’s
frequency might
not be stored in
memory.
Make sure the
channel’s frequency is
stored in the scanner’s
memory.
Troubleshooting
SC230 Paper OM 062206.fm Page 81 Friday, July 21, 2006 7:39 PM