Filter
Top Products
26
Setting Up Your Scanner
Connecting an Earphone/Headphone
For private listening, you can use the supplied headphone
or can plug a
1
/8-inch (3.5 mm) mini-plug earphone (not
supplied) into the headphone jack on top of your scanner.
This automatically disconnects the internal speaker.
See “Earphone Warning” at the front of the manual for
important information about using an earphone/
headphone.
Connecting an Extension Speaker
In a noisy area, an optional amplified extension speaker,
positioned in the right place, might provide more
comfortable listening. Plug the speaker cable's
1
/8-inch
(3.5-mm) mini-plug into your scanner's jack.
WARNING!
If you connect an external speaker to the scanner's
headphone jack, never connect the audio output line
to a power supply and ground. This might damage the
scanner.
Attaching the Belt Clip
To make your scanner easier to carry when you are on
the go, use the supplied belt clip. Use a Phillips
screwdriver and the supplied screws to attach the clip to
the scanner.
SC230 Paper OM 062206.fm Page 26 Friday, July 21, 2006 7:39 PM