Filter
Top Products
61
Programming/Editing Optional Settings
Setting Channel Alert
program system E
Select the system E
Edit Group E
Select the group E
Edit Channel E
Select the channel E
Set Alert E
This setting controls whether the scanner will alert you
when the channel becomes active. Select your setting,
then press E.
On - the scanner beeps when the channel becomes active.
Off - no alert sounds.
Note: The default setting is Off.
Setting CTCSS/DCS
program system E
Select the system E
Edit Group E
Select the group E
Edit Channel E
Select the channel E
Set CTCSS/DCS E
This setting controls how a subaudible CTCSS or DCS is
used for the channel. Select your setting, then press E.
Off - any signal opens squelch.
Search - the scanner searches for and displays any
CTCSS or DCS tone that accompanies the transmission.
CTCSS - the scanner only opens squelch if the CTCSS tone
you select is also present with the signal. The scanner
then prompts you to scroll to the desired tone.
Menu
Menu
SC230 Paper OM 062206.fm Page 61 Friday, July 21, 2006 7:39 PM