Filter
Top Products
38
Basic Operation
Quick-Storing Channels
1. Hold on an existing channel in any system.
2. Enter the frequency you want to store.
3. To quick-store the channel, press E. Otherwise, press
No.
If you enter a frequency then press E, the scanner stores
it in the Qck Save Grp group in a system called Qck
Save Cnv Sys. These are created if they do not exist.
Then, the scanner prompts you to save other channel
settings.
If you pressed No in Step 3, the scanner prompts you
to select the system and the group where you want to
store the frequency.
Quickly Recalling Channels
1. Press Hold to hold on any channel.
2. Press + Rcl. The scanner prompts you to select
the system where the channel is stored.
3. Rotate the scroll control to select the system, then
press E. The scanner prompts you to select the
channel group where the channel is stored.
4. Rotate the scroll control to select the group, then
press E.
If you selected a conventional system, the scanner
prompts you to select a channel. Rotate the scroll
control to select the channel, then press E to hold on
that channel.
Otherwise, if you selected a racing system, the
scanner automatically selects an active channel from
the car group and holds on that group.
Func
SC230 Paper OM 062206.fm Page 38 Friday, July 21, 2006 7:39 PM