Filter
Top Products
Devices - Quick Setup
11
Now that a device has been added we will add the camera to the Monitor
application and configure its layout.
1. Click the Monitor Manager button in the Administrator.
Figure 2 - The Monitor Manager window.
2. Select a Layout Size (e.g. 2x2 = 4 cameras) and click on one of the
monitor windows. The selected monitor window turns light grey.
3. Select a camera for the active monitor window. An image from that
camera will be shown in the monitor window.
4. Click the OK button to exit the Monitor Manager.
Important!
Click the Exit button to close the Administrator. It is not possible to run
both applications at once, so the one must always be closed before
opening the other.
The steps described above determine how cameras are displayed in the Monitor
application. If a camera is not configured for display here, it will not
appear in the
Monitor application.