Axis Communications AXIS Camera Recorder Camcorder User Manual


 
Installation Guide
6
System Requirements
Before installing, you should be aware of the various requirements that
will apply for your application, and in particular for the desired frame
rate. The values shown below are obtained from real-life tests.
Minimum Processor Requirements for Frame Rates
Approximate Total Frame Rates for Various Configurations
RAM
In general, the better the PC’s processor, the better the frame rate. The
amount of RAM available is of less importance for the frame rate, but is
important for AXIS Camera Recorder’s overall performance. The amount
of RAM required is dependent on the number of cameras in use. For up to
8 cameras - use 512 MB, and for 9-16 cameras - use 1024 MB.
UPS
Whilst not absolutely essential for operation, using an Uninterruptible
Power Supply (UPS) for the computer running AXIS Camera Recorder is
highly
recommended.
NTSC/PAL Cameras 10 fps, medium compression 10 fps, high compression
1 camera P4, 1,0 GHz P4, 1,0 GHz
4 cameras P4, 1,0 GHz P4, 1,0 GHz
8 cameras P4, 1,8 GHz P4 1,0 GHz - P4, 1,8 GHz
16 cameras P4, 3,06 GHz P4, 1,8 GHz
NTSC/PAL Cameras 25 fps, medium compression 25 fps, high compression
1 camera P4, 1,0 GHz P4, 1,0 GHz
4 cameras P4, 1,8 GHz P4, 1,8 GHz
8 cameras P4, 3,06 GHz P4, 3,06 GHz
16 cameras N/A N/A
NTSC/PAL Cameras
P4 1,0 GHz,
Medium compression
P4 1,8 GHz,
Medium compression
P4 3,06 GHz, Medium
compression
1 camera 25 25 25
2 cameras 50 50 50
4 cameras 80 90 100
8 cameras 65 140 170
16 cameras 50 160 200