Filter
Top Products
Inputs and Outputs
41
6. Now find the start time of the event-controlled period and click and
drag the mouse to the end time.
7. You will now be asked to define the selected time period as On Events
or Always. Select On Events and the selected time period turns yellow
in the Scheduler overview.
When online event periods have been set, click the OK button in the
Camera/Alert Scheduler dialog box to start using the event settings and to
return to the main window. The camera will now start and stop on the
specified events, but only when in the specified event period.
Advanced Settings (in I/O Setup)
As inputs are received in different ways from one device to another, it is
sometimes necessary to adjust various port settings. By clicking the
Advanced button, the FTP port, the Alert port (TCP/IP) and the SMTP port
can all be set. The polling frequency can be set for those devices requiring
input polling.
Setting up Output Events
Output events are set up in much the same way as input events. Simply
select the device, click Add new output event... and then select the correct
output and specify how long it will be active for when triggered.