Filter
Top Products
The Administrator Application
24
Defining Motion Detection Exclude Areas
Areas that should not be included in the motion detection area can be
excluded from the image by marking the relevant areas in the Exclude
Regions settings.
Figure 6 - The Exclude Regions dialog.
Clicking in the image with the left mouse button will exclude squares from
the motion detection, as shown above, and clicking with the right button
will include them. It is also possible to Set All - include all squares in the
image in the motion detection, or to Clear All - exclude all squares from
the motion detection.
Also available is the Auto function. This will automatically detect and
exclude “noisy” areas from motion detection. Note that motion detection
must be reasonably well calibrated before this will work properly.
Show grid - Shows or hides the grid lines.
Filled squares
indicate that
motion will
not be
detected here.